ComfortTile^® Radiant Heated Floors

Floor Heating Mats

ComfortTile floor heating mats include rugged heat cable that is pre-spaced and placed on a fiberglass mesh with adhesive backing, allowing for quick, simple roll-out installation.

The heated floor mats can be easily installed directly under tile, natural stone or most other surfaces to provide comfortable, even floor heating for your bathroom, kitchen, entryway, or other hard-surfaced areas. The ComfortTile floor heating mats are compatible with all standard sub-flooring materials, and its low 3/16-inch (3 mm) profile makes ComfortTile heat cable ideal for renovations. The system is one of the most trusted and popular floor heating systems on the market today.

Floor Heating Cable off the Spool

The radiant under floor heating system consists of thermostat-controlled heating cables that are fitted under the surface of the floor to provide safe, evenly distributed heat. The thin, twin-conductor heat cable off the spool is particularly suited for laying out in odd, custom shaped floor heating jobs, allowing installers to make all the necessary adjustments of cable spacing and coverage onsite. Cable strapping is used to secure the cable to the sub-floor and provide for the required spacing.

MORE INFO

Prodeso^® - Floor Heating Membrane

The Prodeso membrane with ComfortTile heat cable is an outstanding and efficient, cost-effective system for heating floors. The ComfortTile heat cable is easily installed and spaced in the pre-engineered channels of the patented membrane.

The Prodeso membrane can be quickly laid out over the subfloor, which helps to reduce installation time and cost. After the membrane is laid out over the subfloor, the cable is installed in the slots provided in the membrane, and the floor surface can be immediately installed over the membrane and cable. The membrane is versatile and can be used on all types of indoor and outdoor applications. The Prodeso system is safe under all conditions and weather, and can be used to heat a wide variety of floor surfaces. It even waterproofs the substrate in the case of overlaying on cracked or imperfectly cured floors with a risk of vapor stress.

FilmHeat™ - Floor Heating Systems

The FilmHeat radiant floor heating system is one of the best values for installing radiant heat under laminate and floating floors. This innovative heating system features a lightweight, easy-to-install heating element that is thinner than a credit card (just 0.016-inch thick). An underlayment and the heating element is laid out under the floating floor, and requires no adhesives. The heating elements can be cut onsite, and no alarms, special tools, or self-leveling compounds are needed, simplifying the installation.

FilmHeat is perhaps the most recommended floor heating solution for floating floors. Despite being so thin, the heating element efficiently provides comfortable, evenly spread warmth across the entire room. And because it is so thin, the installation results in virtually no floor buildup. The floor heating system has proven to be a very versatile, easy-to-install system that can be used to heat a variety of different types of flooring.

In-Slab™ - Radiant Floor Heating

The In-Slab radiant floor heating cable is designed for installation in new concrete slab applications. The heat cable is tied directly to the re-mesh and embedded about 2-inches below the surface. Concrete acts as an excellent conductor, so the thermal heating cable then heats and uses the concrete slab to store and distribute heat evenly throughout its intended area. The warm slab then efficiently warms the room.

Warmzone's In-Slab heat cable is affordable and can be installed under any type of flooring, including hardwood, carpet, and tile so you can enjoy radiant heated floors under any floor in your home.

RetroHeat^® - Under Joist Floor Heating

The RetroHeat floor heating system was designed specifically for providing the comfort and convenience of electric radiant heat to floors without having to undergo any major remodeling work. One simply needs to be able to access the floor joists from either a basement or crawl space. The thin heating panels are stapled up between the floor joists, and then insulation is placed over the element to direct all of the heat upward, warming the floor.

If you have open access to your floor joists, now you can add luxurious radiant floor heat to your home without having to tear out your old floors. The RetroHeat system can be installed to heat ceramic tile, hardwood, laminates, carpet, and more.

MORE INFO

FloorHeat STEP^® - Low-voltage Floor Heating System

FloorHeat STEP is a low-profile, low-voltage heating element that can be installed under just about any material from hardwood floors to roofing. No other radiant heating element can match its characteristics. The radiant heating system utilizes a self-regulating semi-conductive polyethylene heating element that is used for new construction as well as retrofit applications. Warmzone FloorHeat is installed directly under various types of floors, and even in thinset when installing under tile. No additional floor buildup is required when heating floors with FloorHeat.

MORE INFO